3M security window film: the short answer

3M security window film is a clear film fitted to the inside of your glass. If the glass is broken, the film holds the pieces together, so a burglar can’t simply knock out a pane and step or reach through. It buys time and makes noise. The same film is sold as safety or anti-shatter film, because it also keeps broken glass from scattering. It doesn’t make glass unbreakable, bulletproof, fire-rated or quieter.

We fit two 3M security films: 3M Scotchshield Ultra S800, a multi-layer film that 3M says is thinner and less stiff than films of similar tear resistance, and 3M Safety S140, a thicker polyester film at 350 microns. On glazed doors, bi-folds and sliders the glass is often toughened, and how the film is fitted to that glass matters as much as which film you choose.

The short version

  • What it does: holds broken glass in place and slows a break-in. It doesn’t stop a determined attack.
  • The two films: Ultra S800 is certified impact resistant to EN 12600, reached EN 356 class P1A on 6 mm float glass and carries a 15-year 3M warranty. S140 reached EN 356 class P2A on 4 mm float glass and carries 10 years. Different glass, so not a ranking.
  • Toughened glass, common in doors: the pane is taken out, filmed to the edge and refitted behind the beading, so the filmed sheet is held in the frame rather than relying on the film alone.
  • Looks: both are clear. S140 on 6 mm clear glass still lets through 85% of visible light (3M).
  • Fitted by us: we’re an Accredited 3M Window Film Dealer, and we fit every 3M job to 3M’s installation instructions.

Jump to: S800 or S140 | Your glass decides the method | What it won’t do | How we fit it | Questions

The decision you’re really making

The usual worry is someone getting in through a large pane of glass: a back door, bi-folds, a garden room or a ground-floor window out of sight of the street. The film choice is the smaller decision. The bigger one is whether your glass is toughened, because that decides how the film has to be fitted to do its job. Tell us what the glass is, or send us a photo of the small mark in the corner of the pane if there is one, and we’ll tell you which method your windows and doors need.

3M Ultra S800 or 3M S140?

 3M Scotchshield Ultra S8003M Safety S140
How it’s madeMany thin layers of polyester (microlayer)Polyester, 350 microns thick (about 14 mil)
What 3M says about itThinner and less stiff than films of similar tear resistanceScratch-resistant surface; no edge sealing needed
3M’s test results✓ Certified impact resistant to EN 12600
✓ EN 356 class P1A on 6 mm float glass
✓ EN 356 class P2A on 4 mm float glass (TÜV Rheinland, 2020)
No EN 12600 result in the 3M data we hold
Light and UVClear; the Ultra range blocks up to 99.9% of UVLets through 85% of visible light and blocks 99% of UV, on 6 mm clear glass
3M warranty (UK, inside)15 years10 years

Figures are 3M’s published data for each film on the glass named. EN 356 is the European test for resistance to manual attack; P1A is the lowest class and P2A the next one up. The two films were tested on different thicknesses of glass, so the results don’t rank one film above the other. 3M’s data doesn’t give an EN 12600 class for Ultra S800, and we hold no EN 12600 result for S140. Results on other glass may differ.

Your glass decides the method

  • Toughened glass (common in glazed doors, bi-folds and sliders) shatters into small cubes. Film on the surface alone could let the whole filmed sheet be pushed out of the frame in one piece. So we take the glass out, film it edge to edge and refit it behind the beading or gasket. It takes longer and costs more, and it’s what keeps the filmed glass in the frame.
  • Annealed (float) or laminated glass cracks rather than crumbling, and stays largely in the frame, so the film can be fitted to the glass in place without taking the glazing out.

What security film does

  • ✓ It holds broken glass together, so a smashed pane doesn’t shower the room with glass.
  • ✓ It slows a forced entry. 3M tested these films to EN 356, the European standard for resistance to manual attack, and the results are in the table above.

What security film won’t do

  • ✗ It won’t stop bullets. Neither film is ballistic.
  • ✗ It won’t make glass unbreakable. The glass still breaks; the film holds it together and slows the next step.
  • ✗ It won’t make a window fire-rated. 3M has tested how these films behave in a fire, which isn’t the same as fire-resistant glazing.
  • ✗ It isn’t a noise film. The 3M data sheets we hold give no noise rating for either film, and a thin layer of polyester adds almost nothing to the weight of the glass.
  • ✗ It won’t fix weak frames or locks. A burglar who can lever the sash or door won’t bother with the glass.
  • ✗ 3M’s warranty doesn’t cover the glass. It covers the film peeling, cracking, crazing or delaminating, not glass breakage or frame failure.

How we fit it

We’re an Accredited 3M Window Film Dealer and we fit across most of England, and further afield for bigger projects. On every 3M job we follow 3M’s installation bulletin and carry out 3M’s glass check where the glass needs one. 3M then sends your warranty to you directly. When we fit the film, our Residential Workmanship Commitment runs for the same period as 3M’s warranty.

The film needs time to bond fully: 3M gives about 140 days for S140 to reach final adhesion at 18 °C in dry conditions. For the Ultra films, 3M says the glass can be cleaned after 30 days with an ordinary non-abrasive cleaner. We price security film after a free call, because toughened panes have to come out of their frames, which takes longer and costs more. If you’d rather buy 3M film to fit yourself, see where to buy 3M window film, but 3M gives no warranty on film you fit yourself.

Book a free call and tell us which windows and doors worry you. We’ll tell you which film and which method, and what it will cost.

3M Safety S140 – Puncture‑Resistant

A thick laminated film that stops an intruder from making a quick hole to reach through.

  • Strong puncture resistance

  • Keeps broken glass held together

  • Slows opportunistic attacks

  • Completely clear

3M Ultra S800 – Tear‑Resistant

A premium multi‑layer film engineered to resist ripping, pulling, and repeated impact.

  • Micro‑layered construction

  • Extremely high tear strength

  • Designed for serious forced‑entry resistance

  • Optically clear

Both films strengthen your glazing without changing how your home looks.  Just invisible security where it matters.

Correct Installation Matters and It Depends on the Glass Type

Security film performance is only as good as the installation method. And the installation method depends entirely on the type of glass.

Toughened Glass (Tempered Glass)

Film must go behind the beading

Toughened glass breaks into cubes. If the film were applied only to the surface, the entire filmed pane could be pushed out of the frame as one piece, giving easy access.

To prevent this:

  • The glazing is removed from the frame

  • The film is applied edge‑to‑edge

  • The glass is refitted behind the beading or gasket

This traps the filmed glass inside the frame, so even when shattered, it cannot simply fall out. The intruder must now fight the film, the frame, and the beading.  A slow, noisy process that attracts attention.

This is why toughened‑glass installations take longer and cost more, but it’s also why they work.

Annealed, Float, or Laminated Glass

Film can be installed to the frame or gasket

These glass types do not break into cubes. They crack, and remain largely inside the frames. This means the filmed glass does not fall out as a single piece, so the film can be installed directly to the glass

This method still provides excellent forced‑entry resistance without needing to remove the glazing.

The Outcome: Invisible Strength

With 3M Security Window Films:

  • Your glazing stays clear

  • Your home stays bright

  • Your doors and windows look unchanged

  • But forced entry takes longer and makes more noise

It’s discreet, intelligent protection for modern living and a powerful upgrade to any modern extension or glazed space.

Which 3M Security Film is right for your home's safety?

Pricing

Learning Centre

Success Stories

Steve and Chris Gargett, co-founders of WindowTreat

Interested in achieving similar results?

Related Products

Faq

Your questions about 3M security film

Straight answers to the questions people search for most, from what the film does to what it costs. Figures are 3M’s published data for each film.

A clear film fitted to the inside of your glass. If the glass is broken, the film holds the pieces together so the pane can’t simply be knocked out. It slows a break-in and makes it noisier. We fit two 3M grades: Scotchshield Ultra S800 and Safety S140.

Ultra S800 is a multi-layer film, thinner and less stiff than films of similar tear resistance. 3M states it is certified impact resistant to EN 12600, and it reached EN 356 class P1A on 6 mm float glass, and it carries a 15-year 3M warranty. S140 is a thicker film (350 microns); it reached EN 356 class P2A on 4 mm float glass and carries 10 years. Both are clear and both go on the inside. Tell us the glass and what worries you and we’ll recommend one.

It slows them down rather than stopping them. The glass still breaks, but the film holds it together, so someone has to keep hitting, cutting and pulling, which takes time and makes noise. On toughened glass the film only works properly if the pane is filmed to the edge and refitted behind the beading. Good frames and locks still matter.

They do the same basic job: hold broken glass together. People tend to say safety or anti-shatter film when the aim is stopping people being cut by broken glass, and security film when the aim is slowing a break-in. 3M Ultra S800 is certified to EN 12600, the impact test used for safety glass, and also tested for manual attack under EN 356.

Yes, on the inside face. Glass in doors, bi-folds and sliders is often toughened; where it is, we take the pane out, film it to the edge and refit it behind the beading. Where it isn’t, the film can go on with the glass in place. If the door has to meet a particular safety glazing standard or class, tell us before you order. 3M’s data gives no EN 12600 class for these films, so we can’t promise filmed glass will meet one, and whoever set the requirement needs to confirm they accept it.

Hardly. Both films are clear, with no tint or mirror effect. 3M S140 on 6 mm clear glass lets through 85% of visible light.

We don’t sell it for noise. The 3M data sheets we hold for S800 and S140 give no noise rating, and a thin polyester film (S140 is 0.35 mm) adds almost nothing to the weight of the glass. We have no evidence it makes a room quieter, so we won’t claim it. If noise is the problem, it’s a glazing question: ask a glazier about acoustic or secondary glazing.

No. 3M Ultra S800 and 3M S140 are not ballistic films. They hold shattered glass together and slow forced entry; they don’t stop bullets.

No. 3M has tested how these films behave in a fire, but that is a different thing from fire-resistant glazing. Film won’t turn a window or screen into fire-rated glass.

We price it after a free call, because toughened panes have to come out of their frames to be filmed, which takes longer and costs more than filming glass in place. Book a free call and we’ll give you a price for your windows and doors.

3M’s warranty for inside use in the UK is 15 years on Scotchshield Ultra S800 and 10 years on Safety S140. It covers the film peeling, cracking, crazing or delaminating; it doesn’t cover the glass breaking or the frame failing. When we fit it, our Residential Workmanship Commitment runs for the same period. 3M’s remedy is a refund of the film price.

We’re an Accredited 3M Window Film Dealer and we’ll sell film on a roll if you ask, but 3M gives no warranty on film you fit yourself, and on toughened glass the pane has to come out of the frame for the film to work. More on where to buy 3M window film.

Yes. It goes on the inside face of the inner pane. In doors that inner pane is often toughened, so it is taken out, filmed and refitted. We check the glass first and carry out 3M’s glass check where the glass needs one.

A mil is a thousandth of an inch, about 25 microns. 3M S140 is 350 microns, about 14 mil. Ultra S800 is thinner than films of similar tear strength because it’s made of many microlayers.

The adhesive keeps curing for months after fitting. 3M gives about 140 days for S140 to reach final adhesion at 18 °C in dry conditions. 3M says Ultra films can be cleaned 30 days after fitting with an ordinary non-abrasive cleaner; we advise the same wait for S140.

Yes. We fit 3M security film in homes and commercial buildings across most of England, and further afield for bigger projects. On commercial jobs there’s a site survey where the job needs one.


Phone contact form

Contact Our Specialists

For an immediate call back, please phone 

01256 648000.

Our receptionist will gladly schedule a consultation for you.

For a more detailed and personalised call, please use the form below. By telling us about your project in advance, our specialists can prepare tailored advice. We will call you back at your chosen time.